Author Archive
Your small business is running out of bandwidth. What should you do? You remember reading about the incredible speeds of T1 line bandwidth. Should you invest in T1? No, because T1 is an outdated, legacy technology. By the standards of today, T1 is extremely slow.
T1 is also known as digital signal 1 (DS1). A T1 line runs 24 channels of voice grade telephone line. Telephone line has a transfer rate of 64 kilobits (not to be confused with kilobytes) of data per second. Having 24 channels will allow a total of 1.5 megabits of data to be transferred every second.
And that is not that fast. Cable and DSL lines in the United States give customers speeds exceeding 16 megabits every second for downloading and 2 megabits per second for uploading. Outside the U. S., transfer rates are significantly higher and can reach well over 100 megabits per second downloading and 20 megabits per second for uploading.
Additionally many companies are transitioning to voice over internet protocol (or VOIP). Because of advances in compression technology, VOIP can offer clearer calls for less bandwidth and because it is done over the internet they save money that would otherwise go to the phone company.
Are there any benefits to having T1 line bandwidth? Not really. A few years ago, a T1 line had the advantage of upload speeds. The reasoning for this is that T1 allows the signal to travel equally both ways, up and down. With cable and DSL, the signal is stronger down and weaker up because most people download more than they upload. Nowadays, the upload speeds of cable and DSL have dwarfed the speeds of T1 running at full capacity.
The only other potential upside to T1 in the technological world of today is that the bandwidth is dedicated. This means that you will get the full 1.5 megabits per second all of the time. With DSL and cable, you share the connection, so you are not guaranteed maximum speed at all times. During peak times, the connection may slow down, but usually it will not fall to the level of a T1 line.
T1 lines can be bunched together, so purchasing more than one T1 line is an option; though it is very expensive. Therefore, only big businesses usually are the ones that purchase multiple lines. For smaller businesses, bonding DSL or cable lines gives a more economical answer to increasing bandwidth.
T1 line bandwidth used to be the technology to have, but it is now an outdated technology. Ten years ago it would have been the bandwidth solution to your company, but today it should only be purchased for a few special cases.
In order to get the greatest T1 line bandwidth for your company, you need should check with what we have to give you. We can help you get your T1 line prices fast and realizable. When you get on the Internet in your office or at home, you will have fast Internet.
T3 Line Service is a perfect match for medium sized companies that have outgrown their T1 capabilities. T3 is a term created by its inventor, Bell Systems, to describe a voice, data or video line that carries digitized information, resembling a telephone line. If you have a hard time deciding between a T1 and a T3 line for your business, the main factors are how much bandwidth do you think you need and how much money will a T3 line cost you.
When there is talk about T1 and T3 lines, you may also hear a lot about DS1, DS3 or a DS4. There are some minor differences between T lines and DS lines but essentially they are the same. A T1 line requires copper lines but T3 connections are put through fiber optics, making them easier and cheaper to install.
A T3 line is a digital channel transmitted by fiber optics which can deal with 45 megabits per second of voice or data. It is the equivalent of 28 older T1 lines. The term T3 is used with D3 since T3 is usually perceived as handling more voice traffic. An average T3 line is made up of 672 channels that are able of carrying data at 44,736,000 bits per second. It is important to note that a bit is not the same thing as a byte: a byte is made up of 8 bits.
Like its predecessor the T1, the T3 line can be configured to carry voice and data but with an added advantage, it can also carry video traffic. T3 circuits can provide businesses with up to 45 mbps of dedicated Internet connectivity. This is a perfect alternative to users who have outgrown their T1 lines and are in need of high capacity access.
If your company requires computer access for more than fifty users at a time or needs to run higher bandwidth applications like video conferencing, then your business should have a T3 connection. T3 lines are the most common carrier lines used by most medium sized commercial enterprises. A T3 is also a commercially viable option for those enterprises looking to resell bandwidth to their known customers. Depending on your location and T3 provider, a T3 line can cost between $3,000 and $12,000 a month.
There are scores of websites that act as brokers between the broadband providers and potential customers. They can offer free, no obligation quotes from the providers to those businesses that type in their email address, and state location. It is important to remember that if your business is located in a less populous state like Delaware rather than California, the costs of providing the fiber optic lines may be several times more expensive so plan ahead.
So what else do you have to consider when deciding whether or not to get a T3 line? Do you need network connectivity or Internet access? Do you need data, voice and video or do you need just two of the three? T3 lines can be costly so each business must balance their needs with their budget.
Get more information in real-time about how you can use T3 Internet service to expand your company fast and easy! When you utilize a DS3 Voice system, your company will be able to function more efficiently without call disruptions.

