Reviews and Information on High Performace Truck Parts and Engines

Posts Tagged ‘around’

World Engines

by Observe The Banana

Question by PiscesPassion: Water leaks around the engine of a 1985 Ford F250 diesel truck?
My husband recently bought a 1985 Ford F250 diesel truck for $ 1000 w/out telling me… He loves it, I think it was a bad deal… very cracked front windshield, diesel smell is nauseates me, I think he could have paid less for it, etc, etc… but he loves it.
This week the truck overheated on his way home from work and ended up “parked” for a few days… My husband had no time to take a look at it due to work). Yesterday was his day off and he spent almost all day trying to figure out where the water leaks were coming from… and ultimately it seems the water leaks are around the engine somewhere.
I know this might not make sense for me as a woman who knows absolutely nothing about cars (let alone trucks), but my husband wants me to research online and see if there are any suggestions. That’s how he told me to ask, too, about “water leaks around the engine”.
Can anyone suggest anything???
I would appreciate it =)
PS: I’m trying so hard not to have the I-told-you-so attitude regarding his truck in general, because I try not to be a “nagging wife”… plus his happiness means the world to me, so I’m only trying to “help him” not be so down about his truck. Thanks for understanding this =)
~Rose
ADD: I’m sorry… I forgot to add that he’s already checked all the hoses. He thinks it’s odd that the only place it “leaks” is somewhere between the starter and the transmission.
PS: How many seals are there where the face of the engine connects to the transmission?

Best answer:

Answer by rick29148
First place to look is at the hoses. Radiator and heater hoses age and crack. When they crack, sometimes they won’t leak until the coolant heats-up and expands, pressurizing the system. So, if he can’t find any leaks with a cold engine, tell him to fill the radiator with water and fire the truck up, and see if it leaks when it’s warm. If he does find a bad hose, probably best to replace all of them, radiator AND heater.

Add your own answer in the comments!
Please visit our Edelbrock, World Engines, and Comp Cams vendor. Doug Herbert Performance Parts Centers

Trick Flow

Trick Flow’s LS Camaro Runs 11s for Around 14K. You Can Build One, Too

Go quick and do it cheap is a time-honored rodder’s mantra… and Trick Flow Specialties 1998 Camaro Z28 proves the concept is still valid. You can drive it to the track, run 11 second ETs all day, and get 25 miles per gallon on the way home with the A/C on nuclear and the power seat set to Detroit Lean. No blower, no nitrous, nothin’ but motor. Total cost for the Stage One version: a smidgen under ,000, including the purchase price of the car.

“This is a very realistic build for the average guy,” said Al Noe, Product Manager of Trick Flow, told us. “LS1 Camaros are affordable, and the majority of the parts are either on our shelf or straight out of the Summit Racing catalog. The Camaro is quick, but it’s not some stripped down, barely streetable car that lives only at the track.”   

The Car

Trick Flow shelled out ,000 for a rust-free, 140,000-mile Z from Texas with an LS1, a 4L60E automatic, and a 3.73-geared 10-bolt. Our quickie browse of Autotrader.com yielded several nice 1998 to 2000 Camaros for under ,000 (some with less than 100K on the odometer), so Trick Flow got a pretty good deal, especially since the car is a hardtop and not a creaky, floppy T-top model.

Stage One: The Top End

The buildup centers on Trick Flow’s GenX™ Top-End Engine Kit. It has all the stuff to convert a stock LS1 short block into a dyno-proven 515 hp beastie, less the recommended LS6-style intake manifold. Naturally, Trick Flow aluminum heads are at the core of this kit. The fully CNC-ported GenX 215 heads have 215cc intake runners, 80cc exhaust runners, 64cc combustion chambers with 2.040/1.575 in. valves, and 1.300 in. dual valve springs rated to .600 in. of valve lift.

The GenX 215s also have a shallower 13.5 degree valve angle (factory is 15 degrees) and spark plugs located closer to the center of the chambers. These changes unshroud the valves to significantly increase mid-lift airflow. At 0.400 in. of valve lift, the GenX 215s flow 269 cfm on the intake side, about 25% more than the factory LS1 intake runners at 215 cfm. The airflow chart shows the flowbench test results.

The following parts round out the GenX Top-End Engine Kit:

• Track Max roller camshaft (228/230 degrees duration @ 0.050, 0.585 in. lift with 1.7 ratio

  rockers, 112 degree lobe separation)

• Harland Sharp 1.7 ratio roller rocker arms

• Trick Flow chromemoly pushrods

• GM Performance Parts head bolts, intake and exhaust gaskets, and balancer bolt

Air, Fuel, Exhaust

The intake manifold is the familiar FAST LS1/LS6 polymer piece. Fuel is supplied by 30 lb./hr. Trick Flow TFX injectors. Air comes in via a Trick Flow TFX 85mm throttle body. The exhaust system consists of 1 3/4 in. primary Dynatech SuperMAXX long tube header and midpipe system and a Stainless Works 3 in. cat-back system.

Other Stuff

To keep the Camaro from falling on its face off the line, Trick Flow sourced a 3,600 rpm stall Super StreetFighter converter from TCI. With more stall comes more heat, so a B&M Hi-Tek Supercooler transmission cooler was added keep the 4L60E’s fluid from boiling over. The battery was banished to the trunk to help weight transfer.

The idle, fuel, and spark parameters in factory ECU were modified via laptop with EFILive tuning software. The transmission shift points were also raised to 6,300 rpm to take advantage of the extra top-end horsepower.

Trick Flow took the Camaro to Summit Racing Equipment Motorsports Park (Norwalk, Ohio) to see what the upgrades were worth in the quarter. A stock ‘98 LS automatic F-body is capable of mid-13 second ETs. With around 205 extra hp available (510 vs. stock 305) and Al Noe at the wheel, the Z ran a best of 11.84 @ 114 mph—not too shabby for a car on the stock suspension and all-season radials.

Stage Two: The Quest for More

The track testing also revealed the effect 140,000 miles can have on suspension bits. Several boxes’ worth of parts from BMR Fabrication (K-member, torque arm, lower control arms, adjustable panhard bar, subframe connectors) and QA1 (front and rear coil springs and shocks) took care of the slop.

Despite the best efforts of the Hi-Tek cooler, the 4L60E was showing signs of imminent heat-induced demise. It was replaced with a TCI Super StreetFighter trans. And in anticipation of the extra stick from the new set of Mickey Thompson ET Radials, the factory 10-bolt rear axle was replaced with a Moser 12-bolt with 4.11s and a Detroit Tru-Trac. These upgrades improved the Camaro’s times to a best of 11.60 @ 116 mph.

Stage Three: Forged Short Block

Unfortunately, the better grip and harder shifts took their toll on the short block when the top of #7 cylinder’s cast hypereutectic piston decided to implode. This is a common problem on LS1s due to issues with coolant flow (#7 is last on the list, so it gets the hot water) and a tendency to run lean (leading to detonation). Trick Flow’s Ron Grezanik turned lemons into lemonade by upgrading the short block with a set of Wiseco forged pistons and Wiseco/K1 Technologies 4340 billet steel connecting rods.

The refreshed short block proved its worth by lowering the Camaro’s ET by two-tenths of a second (11.40 at 118 mph). Al Noe thinks there’s more to be wrung out of the car. “At a good track in perfect air, the Camaro could go 11.20s or even a little quicker,” he noted.

What’s Next

The Camaro will continue to serve as a Trick Flow test mule for cylinder heads and other LS go-go parts. With a 10.3:1 compression forged short block, some power adder fun is definitely not out of the question—nor is joining the cast of this year’s Hot Rod Power Tour™ if Mr. Noe can fit it into his very busy schedule. In the meantime, he would be more than happy to let you use this story as template for your own 11-second, budget-friendly Camaro.

Related Trick Flow Articles
Please visit our Edelbrock, Trick Flow, and Comp Cams vendor. Doug Herbert Performance Parts Centers

I m RIGHTS? Able to find a place that deals with small companies and perhaps sell parts. Is there somewhere that the performance parts f? R to take EVERYTHING? Go Karts, D? Nebuggys, racing cars, Motorcycles, and so on?

please visit our Performance Engines partner. Doug Herbert Performance Parts Centers

Comment and rate plz- A walk around with my Yamaha Raptor 250 SE custom with GYTR parts. This is just a look so dont tell me that i can ride it as well cuz i know that i can. But ur comments are appreciated. comment and rate ppl

Introducing the DINAN S3-R M3. This BMW M3 is raised to DINAN standards with 527 hp and 407 ft-lbs! Visit www.DinanCars.com to see all of our BMW performance parts for exhaust, intake, software and suspension tuning. All backed by a BMW factory matching 4yr./50K mi warranty. Complete with 4.6L Stroker motor. Carbon Fiber Intake, Performance software, High Flow Throttle Bodies, Underdrive Crankshaft Pulley, Exhaust, Middle Racing Exhaust, Racing Rear Toe Links, Stage 3 Suspension System, CF Strut Brace, and Lightweight Wheels wrapped in Michelin Pilot Sport 2.